* Since: 2.10
*/
signals[BEGIN_PRINT] =
- g_signal_new ("begin_print",
+ g_signal_new (I_("begin-print"),
G_TYPE_FROM_CLASS (gobject_class),
G_SIGNAL_RUN_LAST,
G_STRUCT_OFFSET (GtkPrintOperationClass, begin_print),
* Since: 2.10
*/
signals[REQUEST_PAGE_SETUP] =
- g_signal_new ("request_page_setup",
+ g_signal_new (I_("request-page-setup"),
G_TYPE_FROM_CLASS (gobject_class),
G_SIGNAL_RUN_LAST,
G_STRUCT_OFFSET (GtkPrintOperationClass, request_page_setup),
* Since: 2.10
*/
signals[DRAW_PAGE] =
- g_signal_new ("draw_page",
+ g_signal_new (I_("draw-page"),
G_TYPE_FROM_CLASS (gobject_class),
G_SIGNAL_RUN_LAST,
G_STRUCT_OFFSET (GtkPrintOperationClass, draw_page),
* Since: 2.10
*/
signals[END_PRINT] =
- g_signal_new ("end_print",
+ g_signal_new (I_("end-print"),
G_TYPE_FROM_CLASS (gobject_class),
G_SIGNAL_RUN_LAST,
G_STRUCT_OFFSET (GtkPrintOperationClass, end_print),
* Since: 2.10
*/
signals[STATUS_CHANGED] =
- g_signal_new ("status-changed",
- G_TYPE_FROM_CLASS (class),
- G_SIGNAL_RUN_LAST,
- G_STRUCT_OFFSET (GtkPrintOperationClass, status_changed),
- NULL, NULL,
- g_cclosure_marshal_VOID__VOID,
- G_TYPE_NONE, 0);
+ g_signal_new (I_("status-changed"),
+ G_TYPE_FROM_CLASS (class),
+ G_SIGNAL_RUN_LAST,
+ G_STRUCT_OFFSET (GtkPrintOperationClass, status_changed),
+ NULL, NULL,
+ g_cclosure_marshal_VOID__VOID,
+ G_TYPE_NONE, 0);
/**
* GtkPrintOperation:default-page-setup:
*
* The #GtkPrintSettings used for initializing the dialog.
*
- * Setting this property is typically used to re-establish print
- * settings from a previous print operation, see gtk_print_operation_run().
+ * Setting this property is typically used to re-establish
+ * print settings from a previous print operation, see
+ * gtk_print_operation_run().
*
* Since: 2.10
*/
/**
* GtkPrintOperation:job-name:
*
- * A string used to identify the job (e.g. in monitoring applications like eggcups).
+ * A string used to identify the job (e.g. in monitoring
+ * applications like eggcups).
*
- * If you don't set a job name, GTK+ picks a default one by numbering successive
- * print jobs.
+ * If you don't set a job name, GTK+ picks a default one
+ * by numbering successive print jobs.
*
* Since: 2.10
*/
* The number of pages in the document.
*
* This <emphasis>must</emphasis> be set to a positive number
- * before the rendering starts. It may be set in a ::begin-print signal hander.
+ * before the rendering starts. It may be set in a ::begin-print
+ * signal hander.
*
- * Note that the page numbers passed to the ::request-page-setup and ::draw-page
- * signals are 0-based, i.e. if the user chooses to print all pages, the last
- * ::draw-page signal will be for page @n_pages - 1.
+ * Note that the page numbers passed to the ::request-page-setup
+ * and ::draw-page signals are 0-based, i.e. if the user chooses
+ * to print all pages, the last ::draw-page signal will be for
+ * page @n_pages - 1.
*
* Since: 2.10
*/
/**
* GtkPrintOperation:use-full-page:
*
- * If %TRUE, the transformation for the cairo context obtained from
- * #GtkPrintContext puts the origin at the top left corner of the page
- * (which may not be the top left corner of the sheet, depending on page
- * orientation and the number of pages per sheet). Otherwise, the origin
- * is at the top left corner of the imageable area (i.e. inside the margins).
+ * If %TRUE, the transformation for the cairo context obtained
+ * from #GtkPrintContext puts the origin at the top left corner
+ * of the page (which may not be the top left corner of the sheet,
+ * depending on page orientation and the number of pages per sheet).
+ * Otherwise, the origin is at the top left corner of the imageable
+ * area (i.e. inside the margins).
*
* Since: 2.10
*/
PROP_USE_FULL_PAGE,
g_param_spec_boolean ("use-full-page",
P_("Use full page"),
- P_("%TRUE if the the origin of the context should be at the corner of the page and not the corner of the imageable area"),
+ P_("TRUE if the the origin of the context should be at the corner of the page and not the corner of the imageable area"),
FALSE,
GTK_PARAM_READWRITE));
/**
* GtkPrintOperation:track-print-status:
*
- * If %TRUE, the print operation will try to continue report on the status of
- * the print job in the printer queues and printer. This can allow your
- * application to show things like "out of paper" issues, and when the
- * print job actually reaches the printer. However, this is often
- * implemented using polling, and should not be enabled unless needed.
+ * If %TRUE, the print operation will try to continue report on
+ * the status of the print job in the printer queues and printer.
+ * This can allow your application to show things like "out of paper"
+ * issues, and when the print job actually reaches the printer.
+ * However, this is often implemented using polling, and should
+ * not be enabled unless needed.
*
* Since: 2.10
*/
PROP_USE_FULL_PAGE,
g_param_spec_boolean ("track-print-status",
P_("Track Print Status"),
- P_("If %TRUE then the print operation will continue to report on the print job status after the print data has been sent to the printer or print server."),
+ P_("TRUE if the print operation will continue to report on the print job status after the print data has been sent to the printer or print server."),
FALSE,
GTK_PARAM_READWRITE));
* GtkPrintOperation:unit:
*
* The transformation for the cairo context obtained from
- * #GtkPrintContext is set up in such a way that distances are measured
- * in units of @unit.
+ * #GtkPrintContext is set up in such a way that distances
+ * are measured in units of @unit.
*
* Since: 2.10
*/
PROP_SHOW_DIALOG,
g_param_spec_boolean ("show-dialog",
P_("Show Dialog"),
- P_("%TRUE if gtk_print_operation_run() should show the print dialog."),
+ P_("TRUE if gtk_print_operation_run() should show the print dialog."),
TRUE,
GTK_PARAM_READWRITE));
/**
* GtkPrintOperation:pdf-target:
*
- * The name of a PDF file to generate instead of showing the print dialog.
+ * The name of a PDF file to generate instead of showing
+ * the print dialog.
*
- * The indended use of this property is for implementing "Export to PDF"
- * actions.
+ * The intended use of this property is for implementing
+ * "Export to PDF" actions.
*
* "Print to PDF" support is independent of this and is done
- * by letting the user pick the "Print to PDF" item from the list
- * of printers in the print dialog.
+ * by letting the user pick the "Print to PDF" item from the
+ * list of printers in the print dialog.
*
* Since: 2.10
*/
PROP_JOB_NAME,
g_param_spec_string ("pdf-target",
P_("PDF target filename"),
- P_(""),
+ P_("PDF target filename"),
NULL,
GTK_PARAM_READWRITE));
projects / gtk4.git / commitdiff